Industrial cable sourcing from Singapore+65 6659 3621 · sales@sgcables.com

Sourcing & suppliers · 11 October 2026

Cable BOQ & RFQ Checklist: What Singapore Contractors Should Include

A clear cable bill of quantities (BOQ) makes sourcing easier and reduces avoidable clarification rounds. Whether you are an M&E contractor, panel builder, facilities buyer or engineering procurement team, a quotation request should tell the supplier not only which cable you need, but how it will be used, which standard applies, how much is required and where it must be delivered.

This practical checklist is for industrial and project cable procurement in Singapore and international projects. It is a purchasing guide, not a substitute for electrical design or installation advice. Cable selections must be confirmed by a suitably qualified designer or engineer; in Singapore, electrical work must be undertaken or supervised by an appropriately licensed electrical worker (EMA).

1. Begin with a cable schedule—not just a product name

“Power cable, 500 metres” is usually too vague for a reliable commercial offer. A useful cable schedule or material requisition separates every materially different construction or size into its own line. Include the project or drawing reference so both buyer and supplier can trace changes.

BOQ field What to specify Example (illustrative only)
Line/reference Buyer line number, project code, drawing reference CAB-001 / E-103
Application Power distribution, control, instrumentation, data or another use Fixed indoor power feeder
Voltage designation Rated voltage required by project design 0.6/1 kV (only if specified)
Conductor Copper or aluminium; solid/stranded and relevant class Copper, stranded
Core arrangement and size Number of cores, cross-sectional area and any separate earth conductor 4 cores × 16 mm²
Insulation and sheath Required materials and characteristics XLPE insulation, PVC sheath
Armour, screening and other construction Armoured/unarmoured; overall/individual screening if required Unarmoured
Standards and tests Applicable project standards and edition, acceptance documentation As per approved technical specification
Length and packaging Total metres, cut lengths, drum requirements, tolerances 500 m total; drum preference to confirm
Location and timing Delivery country/site, needed-by date and shipment requirements Singapore; planned project delivery date

The example is deliberately illustrative. Do not use it as a design, installation or purchase specification without engineering review.

2. Include the complete construction requirements

Even when two cables share a core count and conductor size, they may not be interchangeable. Distinguish among the following before requesting prices:

  • Conductor requirements: material, nominal cross-section, class and any conductor-resistance or flexibility requirements. IEC 60228:2023 addresses conductors of insulated cables; confirm the applicable edition and the cable product standard for your project.
  • Electrical characteristics: rated voltage, frequency or signal requirements where relevant, allowable operating conditions and system design constraints.
  • Insulation and sheath: construction, temperature and environmental performance specified by the project.
  • Mechanical protection: armour, tensile or impact considerations, installation method and bending constraints specified by the designer.
  • Screening and shielding: particularly for instrumentation, control, communications and interference-sensitive applications.
  • Fire and environmental performance: the particular tests, certificates and cable category needed, rather than treating “fire resistant”, “flame retardant” and “LSZH” as interchangeable marketing terms.

3. State the exact standard and required evidence

A supplier should not have to guess which technical specification, test regime or certification the project requires. Give the standard number, edition and applicable part wherever available, together with your consultant or tender specification. For instance, IEC 60228 concerns conductor requirements, not every property of a completed cable. A conductor reference alone cannot substitute for the relevant complete-cable standard or project-specific requirements.

If documents are mandatory, list them in the RFQ: manufacturer datasheet, declaration or certificate of conformity, applicable test reports, country of origin information, inspection documentation, or the client’s approved vendor list. Request only the evidence that actually applies to the specified cable and purchase terms. Manufacturer certificates and stock status must be confirmed against the offered item.

4. Quantities, cut lengths and drums affect the quotation

When possible, state each required run or cut length separately rather than giving only an aggregate quantity. If the project requires non-standard drum lengths, maximum drum dimensions, cable-end sealing, dedicated packing, or special identification, put those conditions in the BOQ. Clearly distinguish the required quantity from any contingency or optional quantity and tell the supplier whether partial delivery is acceptable.

5. Delivery and commercial conditions belong in the first enquiry

For a useful delivered quotation, provide the delivery address or country, target delivery date, project reference and any collection/shipping constraints. If a specific Incoterm is required, state the exact term and named place; otherwise request that bidders specify their proposed shipping basis. Avoid assuming a price includes testing, taxes, unloading or special handling unless the quotation clearly states it.

6. What to do when your cable BOQ is incomplete

If you do not know every value, send the available drawings or specifications and mark unknown fields as “to be confirmed”. A supplier can then ask targeted questions rather than quoting a potentially unsuitable substitute. If a proposed equivalent is acceptable, ask for a side-by-side technical deviation statement and written engineering/customer approval before an order is placed.

7. Common cable RFQ errors

  • Using only a generic family name, such as “armoured cable”, without voltage, material, construction or size.
  • Mixing metres, coils, drums and pieces without defining how quantities should be calculated.
  • Not distinguishing project-approved brands from technically acceptable alternatives.
  • Requesting “fireproof” or “certified” cable without identifying the actual test or approval required.
  • Omitting the destination or needed-by date, making lead-time and freight comparisons misleading.
  • Sending a revised BOQ with no revision number or highlighting of changed line items.

8. A simple enquiry workflow for procurement teams

  1. Obtain the latest approved cable schedule, drawings and technical specification.
  2. Confirm the line items with the designer or engineering lead.
  3. Mark mandatory documents, preferred brands and whether equivalents may be evaluated.
  4. Include delivery and packaging requirements.
  5. Send one revision-controlled RFQ and reference all attachments.
  6. Check suppliers’ technical compliance, deviations, lead times and quotation exclusions before commercial comparison.

Send your cable schedule to SGCables

SGCables is a dedicated cable information and sourcing brand operated by Grenglo Energy Pte Ltd, Singapore. Our team can review industrial cable enquiries and clarify the commercial sourcing requirements. Availability, documentation, technical compliance and delivery commitments depend on the confirmed offered products.

Submit Cable RFQ / Upload BOQ ↗

You may also email your BOQ to sales@sgcables.com or call +65 6659 3621.

References: Singapore Energy Market Authority: worker licences; IEC 60228:2023 publication summary. This article is general procurement information and should not be used as electrical engineering or installation instructions.

Have a cable schedule or BOQ?

Send it as it is: voltage, cores and size, standard and metres. We come back with clarifying questions or a line-by-line quotation.